Hans schmidt Vietnam - Shore Durometer HPSO - - Thiết bị tự động hóa công nghiệp - ANS Vietnam

Hổ trợ trực tuyến

Click here to chat Skype Me™!
Click here to chat Skype Me™!
than.ans@ansvietnam.com
huy@ansgroup.asia

Mr. Thân: 038.568.5705

Mr. Huy: 0934 039 951

Menu sản phẩm

Hãng sản xuất

Lượt truy cập

Đang online 46
Lượt truy cập 5970804

Hans schmidt Vietnam - Shore Durometer HPSO

Loại sản phẩm: Shore Durometer

Mã sản phẩm: Shore Durometer HPSO

Nhà cung cấp: Anh Nghi Sơn

Xuất Xứ: chính hãng

Hãng sản xuất: Hans schmidt

Giá : Vui lòng liên hệ

Durometer according to Shore for determining the indentation hardness of soft elastomers, soft elastic materials, medium fast textiles
 

Shore O hardness tester according ASTM D 2240 

Durometer with large seating for accurate measuring
 

 

Special Features

  • The spring loaded outer ring assures a constant measuring pressure and eliminates false readings due to difference between operators
  • Flat bottom prevent tilting and improves the measuring accuracy
  • Working face 18 mm Ø
 

working face hardness tester HPSO
 

  • Adjustable Min./Max. indicator marks to highlight working range of the hardness tester
  • Optionally available: Calibration certificate with calibration report
 

Standard Features

  • Easy to use
  • High repeatability
  • Application range 20 - 80 Shore O units
  • Certificate of Compliance with the order 2.1 according EN 10204 is included
 

Operation

For measuring the hardness, the spring-loaded outer ring of the housing is pressed downwards until the edge of the ring meets the colored marking on the housing. This ensures a constant pressure and prevents measuring errors.
 

General:
The principle used to measure shore hardness is based on measuring the resistance force of the penetration of a pin into the test material under a known spring load. The amount of penetration is converted to hardness reading on a scale with 100 shore units.
As the depth of indentation is max. 2.5 mm the testmaterial has to have a minimum thickness of 6 mm. If thickness is less stack some samples til you reach the required thickness.
 

operation shore durometer HPSO
 

Available Models

Model Shore Application  
HPS0 Shore O soft elastomers, soft elastic materials, medium fast textiles  
    alternative  
HPSA Shore A soft rubber, elastomers, natural rubber, soft PVC, leather, etc. more
HPSA-R..-M Shore A rubber coated rollers, rollers, and cots more
HPSD Shore D plastic and medium hard to hard rubber materials more
HPSB Shore B for harder material than Shore A more
HPSC Shore C medium hard rubber, elastomers and plastic more
HPSDO Shore DO plastic and medium hard to hard rubber materials more
HPSAO Shore AO Foams, steering wheels and inner linings of motor vehicles more
 

Attachments and Accessories

Memory pointer Code M 
 

Memory pointer to capture and store value
(last or highest reading) during measuring.
Order code: e. g. HPSA-M

Test Stand 
 

Model PSHP for series measurements

  • Height adjustable 0 - 200 mm
  • Stroke lever action 40 mm
  • Various plates available optional

Click picture for more information

Control Ring  
 

To determine the displacement at 20 Shore
Order number: HP-P20

Click picture for more information

Control Rings 
 

To determine the displacement at 20, 40, 60 and 80 Shore. 
Includes a base disk as basis and an inspection certificate.
Order number: HP-P20-100

Click picture for more information

Calibration Certificate 

Calibration certificate with calibration report is optional available.
 

Delivery Includes

 

scope of delivery hardness tester HPSO: Hardness tester with carrying case, Certificate of Compliance with the 
order 2.1 according EN 10204 free of charge, operating instructions in 
english or german as requested
 

Dimensions

DimensionsFor PDF-file please
click picture
 

Specifications

Indentor:
U-grooved 3/32''    
Depth of indentation: 0 - 2.5 mm
Typical applications: Soft elastomers, soft elastic materials, medium fast textiles
Accuracy: ± 1 hardness unit
Application range: 20 - 80 Shore O
Standard: ASTM D 2240
Measuring spring force: 0.55 - 8.065 N
Test pressure*: Approx. 12.5 N
Scale diameter: 54 mm
Display range: 0 - 100 Shore O units
Working face: 18 mm Ø
Base plate: 44.5 mm Ø
Weight, net (gross): Approx. 300 g (500 g)
Dimensions: 50 x 58 x 110 mm (LxWxH)
 

Sản phẩm liên quan

Hans schmidt Vietnam - Te ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...