Hans schmidt Vietnam - Shore Durometer SHTA - - Thiết bị tự động hóa công nghiệp - ANS Vietnam

Shore A hardness tester according DIN 53505, ISO 7619, ISO 868 and ASTM D 2240 

Compact durometer for fast measurements 

• Compact hardness tester for fast measurements
• Measuring face 18 mm Ø

• Adjustable Min./Max. indicator marks to highlight the working range of the hardness tester
• Optionally available: Calibration certificate with calibration report

• Easy to use
• High repeatability
• Application range 10 - 90 Shore A units
• Certificate of Compliance with the order 2.1 according EN 10204 is included

For measuring the hardness, place the durometer vertical and shock-free on the material to be measured and press the housing down, until the measuring face rests on the sample.

General:
The principle used to measure shore hardness is based on measuring the resistance force of the penetration of a pin into the test material under a known spring load. The amount of penetration is converted to hardness reading on a scale with 100 shore units.
As the depth of indentation is max. 2.5 mm the testmaterial has to have a minimum thickness of 6 mm. If thickness is less stack some samples til you reach the required thickness.

Model	Shore	Application
SHTA	Shore A	soft rubber, elastomers, natural rubber, soft PVC, leather, etc.
		alternative
SHTD	Shore D	plastic and medium hard to hard rubber materials	more

For PDF-file please
click picture

Indentor:	Cone 35°,    1.25 mm Ø
Depth of indentation:	0 - 2.5 mm
Typical applications:	Soft rubber, elastomers, natural rubber, soft PVC, leather, etc.
Accuracy:	± 1 hardness unit
Application range:	10 - 90 Shore A
Standard:	DIN 53505, ISO 7619, ISO 868, ASTM D 2240
Measuring spring force:	0.55 - 8.065 N
Scale diameter:	54 mm
Display range:	0 - 100 Shore A units
Working face:	18 mm Ø
Housing diameter:	24 mm Ø
Weight, net (gross):	Approx. 200 g (300 g)
Dimensions:	28 x 58 x 110 mm (LxWxH