Hans schmidt Vietnam - Torque Meter HTGS and HTGA - - Thiết bị tự động hóa công nghiệp - ANS Vietnam

Hổ trợ trực tuyến

Click here to chat Skype Me™!
Click here to chat Skype Me™!
than.ans@ansvietnam.com
huy@ansgroup.asia

Mr. Thân: 038.568.5705

Mr. Huy: 0934 039 951

Menu sản phẩm

Hãng sản xuất

Lượt truy cập

Đang online 31
Lượt truy cập 5970603

Hans schmidt Vietnam - Torque Meter HTGS and HTGA

Loại sản phẩm: Torque Meter

Mã sản phẩm: Torque Meter HTGS and HTGA

Nhà cung cấp: Anh Nghi Sơn

Xuất Xứ: chính hãng

Hãng sản xuất: Hans schmidt

Giá : Vui lòng liên hệ

Measuring range 50.00 Ncm/2.000 Nm/5.000 Nm/10.00 Nm
Resolution 0.01 Ncm/0.001 Nm/0.01
 Nm

 

Hand-held torque meter with separate sensor for measuring the torque of screws, components, screw and plug connectors, drive shafts etc.
 

Mains and battery operation with memory and output signal 

Torque meter with digital output signal for data processing with a PC
 

 

Special Features

  • Two selectable modes: Real Time: to display torque transition
                                                Peak Mode: to capture the peak torque achieved during a test
  • Display of opening or closing torque (clockwise and counterclockwise torque)
  • Torque meter with high internal sampling rate of 2000 times/sec
  • Display update time 10 times/sec
  • Easy to read Display
 

Display torque meter HTGS
 

  • Selectable units: Nm, Ncm, kgfm, kgfcm, lbf.in and ozf.in
  • Multi language set up menu: english, german, spanish, french, italian, chinese, japanese, korean
  • Programmable high/low setpoints for go/no-go testing with color-coded indicators (orange, green, red) in the LED display and relais outputs
 

Display torque meter HTGS
 

  • Storage of 1000 values for recall:
    - on the display
    - for data transfer to PC
    - for printing with report
  • 4 output signals: USB, RS232, analog and Mitutoyo Digimatic
  • 6 different sensor attachments are available
  • The torque sensors of model HTGS-10N and HTGA-10N includes an additional supporting handle for better operation
 

Torque sensor with addtional supporting handle for torque measuring unit HTGS
Torque sensor with pin chuck and
additional supporting handle
 
(only HTGS-10N and HTGA-10N)
Application picture torque meter model HTGS
Application: e. g. check-
ing the torque of screws
and rotary switch
 

Special features of model HTGA in comparison to standard unit HTGS

 

  • Readings can be transfered from the internal memory to an USB flash drive or directly saved on it (sampling rate 100 times/sec)
  • 2 high/low output values can be set; If the reading reaches one of the output values, data will be sent to external devices (e.g. PC, printer) for data recording 
  • Indication of two peak values per measurement.
 

Standard Features

  • Inclusive 30 days trial version of Software »Force Recorder Professional«
  • Torque measuring unit for fast, accurate measuring
  • High repeatability
  • Easy to use
  • Manufacturer`s certificate with measured values is included
 

Available Models

Model Model Measuring range Resolution
HTGS-0.5N HTGA-0.5N 0 - 50.00 Ncm 0.01 Ncm
HTGS-2N HTGA-2N 0 - 2.000 Nm (200 Ncm) 0.001 Nm (0.1 Ncm)
HTGS-5N HTGA-5N 0 - 5.000 Nm (500 Ncm) 0.001 Nm (0.1 Ncm)
HTGS-10N HTGA-10N 0 - 10.00 Nm (1000 Ncm) 0.01 Nm (1 Ncm)
 

Delivery includes no sensor attachment

 

Sensor Attachment

Torque Pin Chuck 
 

0.5 to 6.5 mm Ø (not available for torque meters with 0.5 Nm nominal load)
Order number: HT-DC-6.5

Click picture for more information

Socket Holder

3/8" square drive male
Order number: HT-9.5SQ
Hexagon Socket

1/4" female square drive with 3 Pins (Phillips No. 1, No. 2 and screw blade 6.3 mm)
Order number: HT-DBH
Torque Pin Chuck 
 

1.2 to 13 mm Ø (not available for force gauges with 0.5 and 2 N nominal load)
Order number: HT-DC-13

Click picture for more information

Torque Pin Chuck 
 

0.5 to 4.0 mm
Order number HT-DC-4

Click picture for more information

Adapter 

M10 male thread
Order number: HT-AD-M10
Small Table 
 

for samples with Ø of 7 up to 50 mm (for max. 5 Nm nominal load).
Inclusive table pins (ST-P) with urethane surface, length 10 mm.
Recommended for locks, containers for eye drops, etc.
Order number: HT-ST

Click picture for more information

Small Table 
 

for samples with Ø from 7 up to 50 mm (for max. 5 Nm nominal load).
Includes table pins (ST-01P) from stainless steel V2A, corrugated surface, length 10 mm.
Recommended for electronic components, plugs, etc.
Order number: HT-ST-01

Click picture for more information

Small Table 
 

for samples with Ø from 7 up to 50 mm (for max. 5 Nm nominal load).
Includes table pins (ST-02P) with urethane surface, length 30 mm.
Recomended for cosmetics boxes, door knobs, lamps, etc.
Order number: HT-ST-02

Click picture for more information

 

Standard Accessories

ZT Logger 

USB cable approx. 1.5 m long, CD-ROM with USB-driver and software "ZT-Logger" for data transfer
AC Adapter 

For 100 - 240 V AC
Order number: ADW-6010
Inspection Certificate 
 

Delivery includes a manufacturers inspection certificate free of charge

Click picture for more information

 

Accessories (optional)

Force Recorder Light

Software for data aquisition by USB output
- Force-time graph
- Force gauge function setting
- Data storage as CSV file
Order number: SW-21
Force Recorder Standard 

Additional functions in comparision to Force Recorder Light:
5 graphs at maximum can be displayed in a table
Order number: SW-22
Force Recorder Professional 

Additional function in comparision to Force Recorder Light
- 5 graphs at maximum can be displayed i a table
- Force-angle graphing (possible only in combination with an angle meter)
Order number: SW-23
Printer 
 

To print stored values using Mitutoyo Digimatic output.
Order number: DP-1 VR

Click picture for more information

Paper Roll 

For Printer DP-1 VR, 1 Set = 5 pieces
Order number: DP-P
Table Pin 
 

1 set (4 pieces), 10 mm long with urethane surface for the small table.
Recommended for locks, containers for eye drops, etc.
Order number: ST-P

Click picture for more information

Table Pins 
 

1 set (4 pieces), 10 mm long from stainless steel for the small table.
Recommended for electronic components, plugs, etc.
Order number: ST-01P

Click picture for more information

Table Pins 
 

1 set (4 pieces), 30 mm long with urethane surface for the small table.
Recommended for cosmetics boxes, door knobs, lamps, etc.
Order number: ST-02P

Click picture for more information

Test Stand 
 

for fixing the sensor horizontal or vertical (for torque meters up to max. 5 Nm). 
Weight 1.100 g.
Order number: SHT-5N

Click picture for more information

Connecting Cable 

For analog output, for connection to a line recorder.
Length approx. 3 m
Order number: CB-108
Connecting Cable 

For RS 232 output with sub D 9 female, for connection to PC.
Length approx. 3 m
Order number: CB-208
Connecting Cable 

For Mitutoyo Digimatic output, for connection to Mitutoyo printer DP-1 VR. 
Length approx. 3 m
Order number: CB-308
Connecting Cable 

with open ends (37-pin) for all available output signals to connect an unique device.
Order number: CB-908
Connecting Cable 

for trigger input (input signal from an external device e. g. electronic switch to stop the measurement)
Order number: CB-808
Accumulator 
 

Nickel metal hydride accumulator, 2-pole connector
3.6 V, 1300 mAh
Order number: DP-308

Click picture for more information

Calibration Certificate 

Calibration certificate with calibration report is optional available.
 

Delivery Includes

 

Scoope of delivery torque meter HTGS Torque meter with 1 torque sensor and without sensor attachment, handle (only HTG-10N), AC Adapter, carrying case, manufacturer`s inspection certificate, USB cable 1.5 m, CD-ROM with Driver, simple Software for communication and data logging »ZT-Logger« and operating instructions in english
 

Dimensions

DimensionsFor PDF-file please
click picture
 

Specifications

Accuracy: ±0.5 % full scale ±1 digit
Measuring frequency: 2000 times/s
Selectable units: Nm, Ncm, kgfm, kgfcm, Lb.in, and Lb.ozf
Display: OLED, 4 digit, 14 mm high
Overload capacity: Approx. 200 % full scale,
flashing diplay beyond 110 % full scale
Display update: 10 times/s
Memory: Internal memory for max. 1000 values
(clockwise or counter clockwise torque and peak values)
Setpoints: Min (-NG), Max (+NG) programmable,
with output signal
Output signal: USB
RS 232 C (8, 1, N, 19200)
analog ±2 V DC
Mitutoyo Digimatic 
Open collector 3x comperator (+Ng, OK, -NG)
overload signal
Temperature range: 5 - 40 °C
Air humidity: 80 % RH, max.
Power supply: Rechargeable NiMH battery pack (approx. 8 hours continuous use)
and/or 100 - 240 V AC adapter with two adapters(EU/USA)
Dimensions (approx.): Display unit: 187 x 75 x 34 mm (LxWxH)
Sensor: 183 x 39 mm (LxØ)
Weight: (approx.): Display unit: 490 g / sensor: 530 g (without pin chuck) 
complete set 2000 g
 
Additional functions in comparison to standard unit HTGA
Force-displacement measurement: In combination with a test stand with linear scale force-displacement measurements are possible
Memory: Readings can be transfered from the internal memory to an USB flash drive or directly saved on it (sampling rate 100 times/sec)
High low output: 2 high/low output values can be set; If the reading reaches one of the output values, data will be sent to external devices (e.g. PC, printer) for data recording
Extended peak mode: Indication of two peak values per measurement